Getting started
Simple Renamer renames hundreds or thousands of files at once using rules you choose. You see every new name before anything changes, and any batch can be undone, even after a restart.
What you need
- A Windows 10 (version 1809 or later) or Windows 11 PC, 64-bit.
- Your Installation Key from your purchase email (it looks like
XXXX-XXXX-XXXX-XXXX). - The files you want to rename.
Install and activate
- Run SimpleRenamer-Setup.exe from your download page. If Windows shows "Windows protected your PC", click More info then Run anyway. This appears for software from smaller publishers.
- Click Next, accept the license agreement, choose where to install, then click Install and Finish.
- Simple Renamer opens with a short loading screen, then the main window. You can look around straight away.
- Click Enter Installation Key at the top right of the window (or Settings › Enter Installation Key...), paste your key and click Activate. See Your Installation Key.
Until Simple Renamer is activated you can add files, build rules and see the live preview. Renaming needs an activated Installation Key.
A quick tour of the window
- 1Files buttons - + Add Files, + Add Folder, Remove Selected and Clear All. The count shows how many files are in the list.
- 2File list - each file's current name, size and folder, with a tile showing its type.
- 3New name - what each file will be called, with the changed part highlighted. The status column shows Ready, No change or a problem.
- 4Rename Rules tab - your stack of rules and the settings for the selected rule.
- 5Presets and Output tabs - ready-made rule sets, and where renamed files go.
- 6Status, progress and "Saving to..." - what will happen, how far a batch has got, and where the files are going.
- 7Undo Last Rename, Open Output Folder and Rename All (n). While a batch runs, Rename All turns into Stop.
Renaming your first batch
Nothing on your PC changes until the last step, so feel free to experiment.
- Add your files. Click + Add Files or + Add Folder, or drag files and folders onto the window.
- Add a rule. On the Rename Rules tab click + Add rule and choose one, for example Numbering. Or pick a ready-made set on the Presets tab.
- Check the preview. Every file shows its new name straight away, with the changes highlighted. Change the rule's settings and the names update as you type.
- Rename. Click Rename All (n) (or press F5) and confirm.
Changed your mind? Click Undo Last Rename (Ctrl+Z) and every file gets its old name back. See Undo & history.
Until Simple Renamer is activated, the button reads Activate to Rename Files. You can still add files, build rules and see every new name. Undo always works.
Adding files
- + Add Files (Ctrl+O) - pick one or more files.
- + Add Folder (Ctrl+Shift+O) - add every file in a folder.
- Drag and drop files or folders from Windows Explorer onto the window at any time.
Files already in the list aren't added twice. You can add 20 files or 20,000.
Sub-folders and file types
On the Output tab, under Adding files:
| Setting | What it does |
|---|---|
| Include files in sub-folders when adding a folder | Also adds the files in every folder inside it. |
| Include hidden and system files | Also adds files Windows normally hides. |
| Only add these types | Leave empty for all files, or type the types you want, e.g. jpg; png or *.mp3. |
| Sort files by | The order of the list, which is also the order numbers are given out. See Sorting. |
Tidying the list
- Select files and click Remove Selected (Delete), or click the × at the end of a row. This only takes them off the list; the files aren't touched.
- Clear All (Ctrl+L) empties the list.
- Right-click a file for Remove Selected, Open Containing Folder, Copy New Name and Move Files Up / Down.
Rename rules
The Rename Rules tab holds your rule stack. Click + Add rule (Ctrl+R) and choose a rule, or use the Rules › Add Rule menu. Its settings appear under Rule settings.
- Rules run from top to bottom, each one working on the result of the one before. Stack as many as you like.
- Untick a rule's box to skip it without deleting it.
- Use the arrows on a rule card (or Ctrl+Up / Ctrl+Down) to change the order, and the × to remove it.
- Rules › Remove All Rules clears the stack (Simple Renamer asks first).
The rules are described one by one in the next sections:
| Rule | Use it to |
|---|---|
| Find & replace | Swap one piece of text for another. |
| Numbering | Add a counter: 001, 002, 003... |
| Insert text | Add your own text, or the folder name. |
| Remove characters | Cut a number of characters from the start, end or middle. |
| Change case | lowercase, UPPERCASE, Title Case or Sentence case. |
| Clean up | Remove extra spaces, underscores, brackets and odd characters. |
| Regular expression | Pattern matching for complex renames. |
| Photo EXIF data | Use the date a photo was taken, or the camera. |
| MP3 ID3 tags | Use a song's artist, album, track number and title. |
| File date | Add the date the file was created or changed. |
Several rules have a Where setting: Replace the name, At the start, At the end or At position (counting characters from the start). At the start and At the end use the Separator you choose, such as _. The file extension is never changed unless a rule says otherwise.
Text rules
These rules work on the text of the name itself.
Find & replace
Replaces text anywhere in the name. Example: find IMG, replace with Holiday turns IMG_4821.jpg into Holiday_4821.jpg.
| Setting | What it does |
|---|---|
| Find | The text to look for. |
| Replace with | The new text. Leave it empty to remove what you found. |
| Match case | Only match the same capitals. |
| Replace the first match only | Change only the first place it appears in each name. |
| Use regular expressions | Treat Find as a pattern (see Regular expression). |
| Include the extension | Also look in the extension, e.g. to change .jpeg to .jpg. |
Insert text
Adds your own text at the start, at the end or at any position. Type {folder} to insert the name of the folder the file is in, e.g. _{folder}_.
| Setting | What it does |
|---|---|
| Text | What to add. |
| Where | At the start, At the end, or At position. |
| Position | With At position: how many characters in from the start. |
Remove characters
Removes a number of characters from the start or the end, or a range from the middle. Handy for stripping camera prefixes like DSC_.
| Setting | What it does |
|---|---|
| Remove | From the start, From the end, or A range. |
| How many characters | How many to remove. |
| Starting at position | With A range: where to start (0 is the first character). |
Change case
| Setting | Choices |
|---|---|
| Name | Leave as it is, lowercase, UPPERCASE, Title Case or Sentence case. |
| Extension | Leave as it is, lowercase or UPPERCASE. (.JPG to .jpg is a common fix.) |
Clean up
Tidies messy names. Example: MY__holiday PIC.JPG can become My Holiday Pic.jpg together with a Change case rule.
| Setting | What it does |
|---|---|
| Turn underscores into spaces | my_file becomes my file. |
| Turn dots into spaces | Dots inside the name (not the extension) become spaces. |
| Turn dashes into spaces | Dashes become spaces. |
| Remove brackets ( ) [ ] { } | Removes the bracket characters. |
| Remove accents | é becomes e, and so on. |
| Also remove these characters | Any other characters to remove, e.g. #!~. |
| Collapse repeated spaces | Several spaces in a row become one. |
| Trim spaces from the ends | Removes spaces at the start and end. |
| Then replace spaces with | Keep spaces, Underscore _, Dash - or Nothing. |
| Web-safe (only a-z 0-9 - _) | Removes every character that isn't a letter, number, dash or underscore, ready for a website. |
Regular expression
For complex renames, a regular expression matches a pattern instead of fixed text. Put parts in brackets to capture them, then reuse them in Replace with as $1, $2... (${name} and \1 work too).
| Setting | What it does |
|---|---|
| Pattern | The pattern to find, e.g. (\d{2})-(\d{2})-(\d{4}). |
| Replace with | The new text, e.g. $3-$2-$1 turns 14-06-2026 into 2026-06-14. |
| Match case | On by default for this rule. |
| Replace the first match only | Change only the first match in each name. |
| Include the extension | Let the pattern see the extension too. |
Useful pieces: \d a digit, . any character, + one or more, * any number, ^ the start of the name, $ the end. If the pattern has a mistake, the rule shows a red message explaining it.
Number & date rules
These rules add numbers, dates and information saved inside your files.
Numbering
Adds a counter with your own start, step and zero padding. Files are numbered in the order of the list, so sort it first.
| Setting | What it does |
|---|---|
| Start at | The first number, e.g. 1. |
| Step | How much to add each time (1 gives 1, 2, 3; 10 gives 10, 20, 30). |
| Digits (zero padding) | 3 gives 001, 002... so the files sort correctly everywhere. |
| Where | Replace the name, at the start, at the end or at a position. |
| Separator | What goes between the name and the number, e.g. _. |
| Restart numbering in each folder | Each folder starts from the beginning again. |
Photo EXIF data
Uses the information your camera or phone saved inside each photo. Example: IMG_4821.JPG becomes 2026-06-14_Cornwall_001.jpg with the Photos by date taken preset.
| Setting | What it does |
|---|---|
| Use | Date taken, Camera model, Camera make, or Camera make + model. |
| Date format | YYYY-MM-DD, YYYYMMDD, DD-MM-YYYY, MM-DD-YYYY, YYYY-MM-DD_HH-MM-SS, YYYYMMDD_HHMMSS, YYYY-MM-DD HH.MM.SS, YYYY-MM, YYYY, or Custom. |
| Custom format | Build your own with codes such as %Y year, %m month, %d day, %H hour, %M minute, %S second. |
| Where / Separator | Replace the name, or add it at the start, end or a position. |
| If a photo has no EXIF data | Use the file's modified date, or Leave the name alone. |
MP3 ID3 tags
Uses a song's tags to name it. Example: Track03.mp3 becomes 03 - Artist - Title.mp3. It also reads FLAC, M4A and OGG tags.
| Setting | What it does |
|---|---|
| Name pattern | How to build the name. Tags you can use: {artist} {album} {title} {track} {disc} {year} {genre} {albumartist}. |
| Track number digits | 2 gives 03, 3 gives 003. |
| Where / Separator | Replace the name, or add it at the start, end or a position. |
| If a tag is missing | Leave the name alone, Use "Unknown", or Leave that tag out. |
File date
Adds the date the file was created or last changed. Example: invoice.pdf becomes invoice_2026-09-30.pdf.
| Setting | What it does |
|---|---|
| Date | Date modified or Date created. |
| Date format / Custom format | The same choices as the EXIF rule. |
| Where / Separator | Replace the name, or add it at the start, end or a position. |
Presets
A preset is a saved set of rules. The Presets tab has six built in. Click Use to load one, then change it however you like.
| Built-in preset | What it does |
|---|---|
| Photos by date taken (2026-06-14_Folder_001) | Date the photo was taken, the folder name and a number. |
| Music: 03 - Artist - Title | Names songs from their tags. |
| Web-safe lowercase names | Lowercase names with only letters, numbers, dashes and underscores. |
| Invoices with modified date | Adds the modified date to the end. |
| Tidy messy names (My Holiday Pic.jpg) | Cleans up and uses Title Case. |
| Numbered clips (Clip_001) | Clip_001, Clip_002... |
Your own presets
- Build your rules, then click Save Current Rules... on the Presets tab (or Rules › Save Rules as Preset..., Ctrl+S) and give it a name.
- Your presets appear under My presets. Double-click one, or select it and click Load. Delete removes it.
- Rules › Load Preset lists every built-in and saved preset.
- Export... saves your current rules as a
.srpresetfile to share or keep. Import... adds a.srpresetfile to your presets and loads it. Both are also on the File menu.
The live preview
The file list always shows the new name next to the old one, updated as you change your rules. The status column tells you what will happen to each file:
| Status | Meaning |
|---|---|
| Ready | The file will get its new name. |
| No change | The rules don't change this name. |
| Conflict - skipped | Two files would end up with the same name, or a file with that name is already there. It's left alone. |
| Problem - skipped | The new name isn't allowed by Windows (for example it's empty or uses a character such as ? or :). It's left alone. |
| Waiting / Renaming... / Renamed / Copied | Progress during a batch. |
The status line at the bottom sums it up, e.g. Ready to rename 248 files. 2 with a conflict will be skipped.
Sorting the list
The order of the list matters for numbering. Choose it on the Output tab (Sort files by) or from Edit › Sort Files By:
- Name, Type (extension), Date modified, Date created, Date taken (EXIF), Size, or Folder, then name.
- Tick Descending to reverse the order.
To move individual files, select them and use Edit › Move Files Up / Move Files Down (Alt+Up / Alt+Down).
Renaming
Click Rename All (n) or press F5. The number is how many files will get a new name. If you're saving copies or moving files, the button reads Copy All or Move All.
- Simple Renamer asks you to confirm, and tells you how many files will be skipped because of a conflict. (Turn this question off on the Output tab or in Settings.)
- Each row shows its progress, and the bottom bar shows the percentage.
- When it's done the status line says, e.g., Renamed 248 files. Undo with Ctrl+Z.
Safe renaming. Simple Renamer handles swaps and chains for you (for example a to b while b becomes c). If anything goes wrong part way through, every file is put back the way it was and you'll see "Nothing was changed."
Click Stop (Esc) to stop after the current file. Files already renamed keep their new names and can be undone.
Output: where renamed files go
The Output tab decides what happens to your files. The line above the progress bar (Saving to...) always shows the current choice.
| Choice | What happens |
|---|---|
| Rename the files where they are | The files keep their place and just get new names. |
| Save renamed copies to this folder (originals kept) | Copies with the new names go into the output folder. Your originals are not touched. |
| Move the files to this folder under their new names | The files move into the output folder with their new names. |
- Type the output folder or click Browse... (also File › Choose Output Folder...). The Example line shows where the first file will end up.
- Recreate sub-folders inside the output folder - files from Photos\Day 2 go into <output>\Day 2. Untick to put every file straight into the output folder.
- Open the output folder when the batch finishes - opens it in Windows Explorer.
- Open Output Folder at the bottom opens it any time (it reads Open Folder when renaming in place).
If a file with the same name is already in the output folder, that file is flagged as a conflict and skipped.
Undo & history
Every batch is saved, even after you close Simple Renamer, so you can always go back.
- Undo the last batch: click Undo Last Rename (Ctrl+Z) and confirm.
- Undo an older batch: choose Edit › Undo History... (Ctrl+H), select the batch and click Undo Selected Batch.
Undoing a renamed or moved batch puts the files back where they were, with their old names. Undoing a batch of copies deletes the copies; the originals are never touched. Files that have been moved or deleted since are left alone, and Simple Renamer tells you how many.
The history keeps the last 50 batches by default. Clear History... empties it. Change how many are kept in Settings.
Settings
Open Settings › Default Settings.... The settings are grouped into tabs.
General
| Setting | What it does |
|---|---|
| Include files in sub-folders when adding a folder | Add the whole folder tree. |
| Include hidden and system files | Also add files Windows hides. |
| Start in the last folder I used | The Add Files and Add Folder windows open where you were last time. |
| Sort new files by / Descending | The order new files are put in. See Sorting. |
| Only add these types | For example jpg; png or *.mp3. Empty means all files. |
| Remember my rules between sessions | Your rule stack is still there next time you open Simple Renamer. |
Output
The same choices as the Output tab: rename in place, save renamed copies or move to a folder, the output folder, recreate sub-folders, and open the folder when the batch finishes.
Renaming & Undo
| Setting | What it does |
|---|---|
| Ask me to confirm before renaming | A final check before each batch. |
| Undo history: Keep the last n batches | How many batches you can undo (5 to 500). |
| Clear Undo History... | Empties the history. You can't undo earlier renames afterwards. |
| Data folder | Where Simple Renamer keeps its settings, presets and history. Open shows it. |
Keyboard shortcuts
| Keys | What it does |
|---|---|
| Ctrl+O | Add files |
| Ctrl+Shift+O | Add a folder |
| Delete | Remove the selected files from the list |
| Ctrl+L | Clear the file list |
| Ctrl+A | Select all files |
| Alt+Up / Alt+Down | Move the selected files up or down |
| Ctrl+R | Add a rule |
| Ctrl+Up / Ctrl+Down | Move the selected rule |
| Ctrl+S | Save the rules as a preset |
| F5 | Rename all |
| Esc | Stop renaming |
| Ctrl+Z | Undo the last rename |
| Ctrl+H | Undo history |
| Alt+F4 | Exit |
Your Installation Key
Your Installation Key is in your purchase email and on your download page. It looks like XXXX-XXXX-XXXX-XXXX. It activates Simple Renamer on your PC. One key works on the number of PCs your license allows.
The license row
The top right of the main window always shows your license status on one line:
| You see | Meaning |
|---|---|
| License Invalid | Buy A License | Enter Installation Key | Simple Renamer isn't activated on this PC yet, or the license needs attention. Renaming is paused. |
| Licensed | Everything is unlocked. The purchase options are hidden. |
Activating
- Click Enter Installation Key in the license row, or choose Settings › Enter Installation Key...
- Paste your key into the box. Dashes are added for you, so it doesn't matter if you copy it with or without them.
- Click Activate. You need to be online for this. Everything unlocks straight away, with no restart.
For your security, once a key has been entered it's only ever shown with the middle hidden, for example ABCD-XXXX-XXXX-WXYZ.
The Settings menu
| Menu item | What it does |
|---|---|
| Enter Installation Key... | Activate Simple Renamer on this PC. |
| Check License Status... | Shows your key (partly hidden), who it's licensed to, the license type, the expiry date if there is one, and how many of your PCs are using it. |
| Deactivate This PC... | Frees this PC's activation so you can use the key on another PC. Your license stays valid. |
| Buy License | Opens the Simple Renamer website to buy a license. Hidden once you're licensed. |
Moving to a new PC
On the old PC choose Settings › Deactivate This PC..., then install Simple Renamer on the new PC and activate it with the same key. If the old PC has died or been wiped, contact support and we'll free the activation for you.
Working offline
Simple Renamer checks your license quietly each time it starts and once a day while it's open. If your PC is offline, or the license service can't be reached, it keeps working normally for 7 days and checks again when you're back online.
"Your license needs attention"
"Maximum number of activations reached"
"License key not found" or "This key is for a different product"
"Could not reach the license server"
Troubleshooting
The new names don't change
Files show "Conflict - skipped"
Files show "Problem - skipped"
\ / : * ? " < > |. Add a Clean up rule, or change the rule that creates the bad name.Photos get the wrong date, or the modified date instead of the date taken
Music files come out as "Unknown" or keep their old name
"The batch couldn't be finished, so every file was put back the way it was"
"Choose an output folder on the Output tab"
Undo says some files were moved or deleted since
The numbers are in the wrong order
Simple Renamer won't start
%APPDATA%\Easier Software LLC\Simple Renamer (paste that into the Windows Explorer address bar to open it).Windows SmartScreen or my antivirus warns about the installer
Where are my settings stored?
%APPDATA%\Easier Software LLC\Simple Renamer on your PC. Uninstalling leaves this folder in place, so a reinstall keeps your settings and activation.Still stuck?
We're happy to help. Tell us what you were doing and what the message said.
Updating & uninstalling
Checking for updates
Updates are free. Choose About › Check for Updates.... Simple Renamer checks the website (it takes a few seconds) and tells you if you're up to date or if a newer version is available, with a button to download it. Run the new installer over the top of your current version; your settings and activation are kept.
If it says "Couldn't check for updates", you're probably offline. Try again later, or visit simplerenamer.com.
The Help and About menus
| Menu item | What it does |
|---|---|
| Help › User Guide | Opens this guide. |
| Help › Contact Support | Opens the Easier Software support page. |
| Help › Simple Renamer Website | Opens simplerenamer.com. |
| Help › More Applications | Our other Windows software. |
| About › About Simple Renamer... | Version number, license status and links. |
| About › Check for Updates... | See above. |
Uninstalling
If you're moving to a new PC, deactivate first (Settings › Deactivate This PC...). Then open Windows Settings › Apps, find Simple Renamer and click Uninstall. Your settings stay in %APPDATA%\Easier Software LLC\Simple Renamer in case you reinstall; delete that folder to remove them too. Your own files are never touched.
