Getting started
Movie Splitter cuts long videos into clips - by time, by file size, by chapter or into equal parts - and joins clips back into one video. By default it copies the video without re-encoding, so your clips keep their full quality and are ready in seconds.
What you need
- A Windows 10 (version 1809 or later) or Windows 11 PC, 64-bit.
- Your Installation Key from your purchase email (it looks like
XXXX-XXXX-XXXX-XXXX). - The videos you want to split or join.
- Movie Splitter reads MP4, MKV, AVI, MOV, WMV, FLV, WebM, TS, M2TS, MPG, MPEG, 3GP, M4V and RMVB files.
- The FFmpeg video engine is installed with Movie Splitter, so there's nothing else to download.
Install and activate
- Run MovieSplitter-Setup.exe from your download page. If Windows shows "Windows protected your PC", click More info then Run anyway. This appears for software from smaller publishers.
- Click Next, accept the license agreement, choose where to install, then click Install and Finish.
- Movie Splitter opens with a short loading screen, then the main window. You can look around straight away.
- Click Enter Installation Key at the top right of the window (or Settings › Enter Installation Key...), paste your key and click Activate. See Your Installation Key.
Until Movie Splitter is activated you can load videos, preview them and set up split points and settings. Splitting and joining need an activated Installation Key.
A quick tour of the window
- 1Toolbar - Add Videos, Add Folder, Remove, the Split Videos and Join Clips views, Split Video Now, Split All, Cancel, Output Folder and settings.
- 2Video Queue - every video you've added. Click one to work on it.
- 3Preview - shows the exact frame at the playhead. Press Space to play.
- 4Playback controls - step, play and jump, plus In, Out and Split Here.
- 5Timeline - your split markers, chapter markers, the audio waveform and the planned clips.
- 6Segments - the list of clips that will be made, with their start, end, length and file name. The Activity Log tab sits next to it.
- 7Split settings - Split Mode, Output Options and Quality, with the Split Video Now button and progress bar at the bottom.
Loading videos
Everything you want to split goes into the Video Queue on the left. Add videos in any of these ways:
- Drag and drop video files from Windows Explorer onto the queue.
- Click Add Videos on the toolbar (or File › Add Videos..., Ctrl+O) and choose one or more files.
- Click Add Folder (or File › Add Folder..., Ctrl+Shift+O) to add every video in a folder.
Click a video in the queue to open it in the preview. Movie Splitter reads its length, size and any chapter markers straight away. You can drag videos up and down to change the order they're split in.
Tidying the queue
- Remove (or File › Remove from Queue, or Delete) takes the selected videos out of the queue.
- File › Clear Queue empties it.
Removing a video from the queue never touches the file on your PC.
Split markers and custom clips are remembered separately for each video in the queue, so you can set up several videos and split them all at once.
The preview and timeline
The preview shows the exact frame at the playhead, and the timecode next to the controls shows where you are (hours, minutes, seconds and milliseconds) and the total length.
Moving around
- Click or drag on the timeline to move the playhead.
- Use the buttons under the preview to go to the start, go back, step one frame back, play / pause, step one frame forward, jump forward 5 seconds or go to the end.
- The keyboard is quicker: see Keyboard shortcuts.
What the timeline shows
- Split markers - where the video will be cut. Drag a marker to move it.
- Chapter markers - chapters found in MP4 and MKV files.
- The audio waveform - handy for finding pauses between scenes. You can turn it off in Settings.
- Planned clips - numbered, so you can see exactly what will be made.
Zooming
Use the zoom buttons at the right of the controls (zoom out, fit the whole video, zoom in), the +, - and 0 keys, or the mouse wheel. Hold Shift and use the wheel to scroll along a zoomed-in timeline.
Choosing how to split
Pick a mode in the Split Mode box on the right. Under the mode you'll see a short summary of the clips it will make, and the Segments list updates as you change things.
| Mode | Use it when |
|---|---|
| Time | You want to cut at particular moments, every few minutes, or keep only certain parts. See Splitting by time. |
| File Size | Each clip must fit under a size limit, for example for email or a USB drive. See Splitting by file size. |
| Chapters | The video already has chapter markers and you want one clip per chapter. See Splitting by chapter. |
| Equal Parts | You want the video cut into a set number of clips of the same length (2 to 999 parts). |
Splitting by time
Choose Time in Split Mode, then one of three ways to work:
At split markers on the timeline
The video is cut at every split marker, so three markers make four clips. To add a marker:
- Move the playhead and click Split Here or press S (also Edit › Add Split Marker at Playhead).
- Double-click the timeline where you want the cut.
- Type an exact time in the box under the option and click Add Split.
Drag a marker to fine-tune it. To remove one, select it and press Delete. Clear Splits (or Edit › Clear All Split Markers) removes them all.
Every fixed length
Enter a Clip length (for example 10:00 for ten-minute clips). The whole video is cut into clips of that length; the last clip holds whatever is left.
Custom clips (start and end times)
Use this to keep only the parts you want - for example three highlights from a long recording. Anything outside your clips is left out.
- Move to where a clip should start and click In (or press I).
- Move to where it should end and click Out (or press O).
- Click Add Clip from In/Out (or press A). Repeat for each clip.
You can also click Add Clip under the Segments tab and type the start and end times straight into the list.
Times are precise to the millisecond. In the default Lossless stream-copy quality, though, each cut lands on the nearest keyframe, usually within 1 to 3 seconds. For a cut on the exact frame, choose Re-encode (see Quality).
Splitting by file size
Choose File Size in Split Mode and enter the Maximum size of each clip in MB or GB. Or pick a ready-made size from the list:
| Preset | Size |
|---|---|
| Email attachment | 25 MB |
| Discord upload | 10 MB |
| CD-R | 700 MB |
| FAT32 USB drive | 4 GB |
| Single-layer DVD | 4.7 GB |
| Blu-ray | 25 GB |
Movie Splitter reads the video's bitrate and works out the cut points for you. After cutting it checks every clip, and if one comes out too big it tightens the cut points and tries again automatically.
Splitting by chapter
Many MP4 and MKV files (recordings, disc copies, lectures) contain chapter markers. Movie Splitter finds them when the video loads and shows them on the timeline.
- Choose Chapters in Split Mode. The box tells you how many chapters were found.
- Click Name Clips by Chapter Title if you'd like each clip named after its chapter (it sets the naming pattern to
{n:02} - {title}). - Split as normal. Each chapter becomes its own clip.
If no chapters are found, the video doesn't contain any. Use Time or Equal Parts instead.
The Segments list and Activity Log
The Segments tab under the timeline lists every clip that will be made: number, Start, End, Length, Title and Output File. Check it before you split - the file names shown are exactly what you'll get.
- Click a row to jump to that clip.
- In Custom clips mode you can edit the start and end times right in the list.
- Type a Title for a clip to use it in the file name with
{title}. - Add Clip from In/Out, Add Clip, Remove and Clear Splits sit above the list.
The Activity Log tab records what Movie Splitter did, including the reason if anything fails. It's useful if you ever need to contact support.
Where clips are saved and how they're named
The Output Options box on the right controls where your clips go and what they're called.
| Option | What it does |
|---|---|
| Output folder | Where clips are saved. Click the folder button to choose one. |
| Save clips next to the original video | Puts the clips in the same folder as the video they came from. |
| Create a sub-folder for each video | Gives every video its own folder of clips, so batches never get mixed up. |
| File naming pattern | How each clip is named. Click Insert to add a token or choose a preset. A live example appears underneath as you type. |
| Prefix | Optional text used by the {prefix} token. |
| Overwrite files with the same name | When ticked, clips replace existing files with the same name. Leave it unticked to keep your old files. |
Naming tokens
| Token | Becomes |
|---|---|
{name} | The original file name |
{prefix} | Your prefix |
{n} / {n:02} | The clip number: 1, 2, 3 or 01, 02, 03 |
{total} | The total number of clips |
{title} | The chapter or clip title |
{start}, {end}, {range} | The clip's start time, end time, or both |
{date}, {time} | Today's date and the current time |
The presets include {name}_part{n:02} (the default), {name} - {title}, {n:02} - {title}, {name}_{range} and {date}_{name}_part{n:02}.
Quality: lossless or re-encode
The Quality box decides how the clips are made.
Lossless stream-copy (recommended)
The video and sound are copied straight into the clips without being re-encoded. There's no quality loss at all and even a two-hour video splits in seconds. Clips keep the same format as the original, so an MP4 gives MP4 clips. (RealMedia .rmvb files are copied into MKV, because RealMedia files can't be written.)
The only catch: each cut lands on the nearest keyframe, usually within 1 to 3 seconds of the time you set.
Re-encode (frame-accurate / change format)
Choose this for cuts on the exact frame, or to change the format, size or bitrate. It takes longer and has a very small quality cost.
| Option | Choices |
|---|---|
| Format | MP4 (H.264 + AAC), MKV (H.264 + AAC), MOV (H.264 + AAC), AVI (MPEG-4 + MP3), WebM (VP9 + Opus) or WMV. |
| Quality | High quality (larger files), Balanced, Smaller files, or Custom video bitrate. |
| Video bitrate | Used when Quality is Custom video bitrate, in kbps. |
| Resolution | Keep original, or scale down to 2160p (4K), 1440p, 1080p, 720p, 480p or 360p. |
| Audio | Sound quality, from 96 to 320 kbps. |
| Encoding speed | Fastest, Fast, Balanced or Best compression. Slower settings make smaller files. |
Splitting one video or a whole batch
- Check the Segments list and the example file name.
- Click Split Video Now (or press F5) to split the video you're looking at, or Split All in Queue (Shift+F5) to split every video in the queue with the same settings.
- Watch the progress bar. Each video in the queue shows a green tick when it's done.
- Click Open Output Folder to see your clips.
To stop, click Cancel or press Esc. Unfinished clips are tidied away.
Until Movie Splitter is activated the button reads Activate to Split Videos and opens the Installation Key window instead. Everything else - loading, previewing, setting split points and choosing settings - works before you activate.
With Split All in Queue, each video uses its own split markers or custom clips, and the shared settings (mode, output and quality) apply to all of them. Tick Create a sub-folder for each video to keep each video's clips together.
Joining clips
Switch to the Join Clips view with the toolbar button, View › Join Clips or Ctrl+2. (Ctrl+1 takes you back to Split Videos.)
- Click Add Clips or drag clips onto the list. Add Last Split adds the clips from your most recent split.
- Put them in order: drag them, use the up and down arrow buttons, or sort them by file name. The trash and cross buttons remove the selected clip or clear the list.
- Choose how to join them in Join Options (see below).
- Check the Output File - where the joined video will be saved. Click the folder button to change it. The format follows the file extension you choose.
- Click Join Clips Now. You need at least two clips.
| Join option | What happens |
|---|---|
| Automatic (lossless when possible) | Clips with the same codec and resolution are joined losslessly in seconds. If they differ, they're converted automatically. The box above tells you which will happen. |
| Lossless only (stream-copy) | Only joins clips that match. Nothing is re-encoded. |
| Always re-encode | Converts everything, using the Quality, Resolution and Encoding speed you choose. Every clip is scaled to the first clip's frame size. |
Until Movie Splitter is activated the button reads Activate to Join Clips.
The FFmpeg video engine
Movie Splitter uses FFmpeg, a well-known video engine, to read and cut your videos. It's installed with Movie Splitter, so you don't need to do anything.
If the engine is ever missing or damaged, Movie Splitter tells you "The FFmpeg video engine is missing" and offers a Download FFmpeg button with a progress bar. Click it, wait for the download to finish, and you're ready to go. You can also do this from the Video Engine tab in Settings.
Reinstalling Movie Splitter over the top also puts the engine back.
Settings
Open the settings window from the Settings menu (Settings › Default Settings...). It has three tabs.
General
| Setting | What it does |
|---|---|
| Open the output folder when splitting finishes | Opens the folder of finished clips in Windows Explorer automatically. |
| Show the audio waveform on the timeline | Draws the sound on the timeline. The audio is analyzed when a video loads; untick this to load very long videos a little faster. |
| Program data | Shows where Movie Splitter keeps its settings. Open Folder opens it. |
| Reset Split and Output Options | Puts the Split Mode, Output Options and Quality settings back to how they were when you installed. |
Video Engine
| Setting | What it does |
|---|---|
| Status | Shows Ready with the FFmpeg version and location, and which H.264 encoder is used when you re-encode. If H.264 isn't available, MPEG-4 is used instead. |
| Custom folder | Only if you want to use a different FFmpeg build. Click Browse... and choose the folder that holds ffmpeg.exe and ffprobe.exe, then Apply. |
| Use Default | Goes back to the engine installed with Movie Splitter. |
| Download FFmpeg... | Downloads the engine again if it's missing or damaged. |
License
Shows your license status, who it's licensed to, your Installation Key (partly hidden) and the expiry date if there is one. Check Status Now checks with the license service and shows how many of your PCs are using the key. See Your Installation Key.
Keyboard shortcuts
You can also see this list in Help › Keyboard Shortcuts.
| Keys | What it does |
|---|---|
| Ctrl+O | Add videos |
| Ctrl+Shift+O | Add a folder of videos |
| F5 | Split video now |
| Shift+F5 | Split all videos in the queue |
| Esc | Cancel the running job |
| Ctrl+1 / Ctrl+2 | Split Videos view / Join Clips view |
| Space | Play / pause |
| ← / → | Back / forward 1 second |
| Shift+← / → | Back / forward 5 seconds |
| Ctrl+← / → | Back / forward 1 minute |
| , / . | Previous / next frame |
| Home / End | Start / end of the video |
| S | Add a split marker at the playhead |
| I / O | Set clip In / Out |
| A | Add a clip from In/Out |
| Delete | Remove the selected split marker, clip or video |
| + / - / 0 | Zoom the timeline in / out / fit the whole video |
| Mouse wheel | Zoom the timeline (Shift+wheel scrolls) |
Your Installation Key
Your Installation Key is in your purchase email and on your download page. It looks like XXXX-XXXX-XXXX-XXXX. It activates Movie Splitter on your PC. One key works on the number of PCs your license allows.
The license row
The top right of the main window always shows your license status on one line:
| You see | Meaning |
|---|---|
| License Invalid | Buy A License | Enter Installation Key | Movie Splitter isn't activated on this PC yet, or the license needs attention. Splitting and joining are paused. |
| Licensed | Everything is unlocked. The purchase options are hidden. |
Activating
- Click Enter Installation Key in the license row, or choose Settings › Enter Installation Key...
- Paste your key into the box. Dashes are added for you, so it doesn't matter if you copy it with or without them.
- Click Activate. You need to be online for this. Everything unlocks straight away, with no restart.
For your security, once a key has been entered it's only ever shown with the middle hidden, for example ABCD-XXXX-XXXX-WXYZ.
The Settings menu
| Menu item | What it does |
|---|---|
| Enter Installation Key... | Activate Movie Splitter on this PC. |
| Check License Status... | Shows your key (partly hidden), who it's licensed to, the license type, the expiry date if there is one, and how many of your PCs are using it. |
| Deactivate This PC... | Frees this PC's activation so you can use the key on another PC. Your license stays valid. |
| Buy License | Opens the Movie Splitter website to buy a license. Hidden once you're licensed. |
Moving to a new PC
On the old PC choose Settings › Deactivate This PC..., then install Movie Splitter on the new PC and activate it with the same key. If the old PC has died or been wiped, contact support and we'll free the activation for you.
Working offline
Movie Splitter checks your license quietly each time it starts and once a day while it's open. If your PC is offline, or the license service can't be reached, it keeps working normally for 7 days and checks again when you're back online.
"Your license needs attention"
"Maximum number of activations reached"
"License key not found" or "This key is for a different product"
"Could not reach the license server"
Troubleshooting
The button says "Activate to Split Videos" or "Activate to Join Clips"
"The FFmpeg video engine is missing"
My clips don't start exactly where I put the marker
Chapters mode says no chapters were found
A clip is slightly bigger than my File Size limit
Join won't work with "Lossless only"
My new clips replaced files I wanted to keep, or clips are missing
A split failed
A long video takes a while to load
Movie Splitter won't start
%APPDATA%\Easier Software LLC\Movie Splitter (paste that into the Windows Explorer address bar to open it).Windows SmartScreen or my antivirus warns about the installer
Where are my settings stored?
%APPDATA%\Easier Software LLC\Movie Splitter on your PC. Uninstalling leaves this folder in place, so a reinstall keeps your settings and activation.Still stuck?
We're happy to help. Tell us what you were doing and what the message said.
Updating & uninstalling
Checking for updates
Updates are free. Choose About › Check for Updates.... Movie Splitter checks the website (it takes a few seconds) and tells you if you're up to date or if a newer version is available, with a button to download it. Run the new installer over the top of your current version; your settings and activation are kept.
If it says "Couldn't check for updates", you're probably offline. Try again later, or visit moviesplitter.com.
The Help and About menus
| Menu item | What it does |
|---|---|
| Help › User Guide | Opens this guide. |
| Help › Contact Support | Opens the Easier Software support page. |
| Help › Movie Splitter Website | Opens moviesplitter.com. |
| Help › More Applications | Our other Windows software. |
| About › About Movie Splitter... | Version number, license status and links. |
| About › Check for Updates... | See above. |
Uninstalling
If you're moving to a new PC, deactivate first (Settings › Deactivate This PC...). Then open Windows Settings › Apps, find Movie Splitter and click Uninstall. Your settings stay in %APPDATA%\Easier Software LLC\Movie Splitter in case you reinstall; delete that folder to remove them too. Your own files are never touched.
