Skip to content

Windows software and web scripts with one-time licenses. No subscriptions.

  User Guide

How to use Converter Software

Everything you need, in plain English - from adding your first files to converting whole folders of documents, photos, music and video.

New to Converter Software? See what Converter Software does, its features and price.

Getting started

Converter Software turns documents, images, audio, video, spreadsheets and archives into the format you need, in one batch, on your own PC. Nothing is uploaded: every file is converted on your computer.

What you need

  • A Windows 10 (version 1809 or later) or Windows 11 PC, 64-bit.
  • Your Installation Key from your purchase email (it starts with CONSO-).
  • The files you want to convert.
  • Optional: Microsoft Word or LibreOffice gives the most faithful document results, and is needed to save in the old Word .doc format. Everything else works with the converters built in to Converter Software.

Install and activate

  1. Run ConverterSoftware-Setup.exe from your download page. If Windows shows "Windows protected your PC", click More info then Run anyway. This appears for software from smaller publishers.
  2. Click Next, accept the license agreement, choose where to install, then click Install and Finish.
  3. Converter Software opens with a short loading screen, then the main window. You can look around straight away.
  4. Click Enter Installation Key at the top right of the window (or Settings › Enter Installation Key...), paste your key and click Activate. See Your Installation Key.

Until Converter Software is activated you can add files and folders and change every setting. Converting needs an activated Installation Key.

A quick tour of the window

The Converter Software window with numbered areas: menu bar, license row, batch queue, settings panel with three tabs, status line and the Convert All button
Click any screenshot to see it bigger.
  • 1Menu bar - File, Edit, Settings, Help and About.
  • 2License row (top right) - shows Licensed or License Invalid. Click the status to check your license.
  • 3Batch queue - drop files or folders here, or use + Add Files and + Add Folder. Each file shows its size, current format, the format it will become and its progress.
  • 4Settings panel - three tabs: Convert To, Quality and Output.
  • 5Status line and overall progress - what is happening now, and where files are being saved.
  • 6Open Output Folder and Convert All. The big button reads Stop while a batch is running, and Activate to Convert before activation.

Back to top

What it can convert

You can mix file types in the same batch, for example Word documents, iPhone photos and videos all at once.

TypeFiles you can addCan be converted to
DocumentsPDF, DOCX, DOC, ODT, RTF, TXT, HTML, Markdown (MD), EPUBPDF, DOCX, DOC, ODT, RTF, TXT, HTML, MD, EPUB. A PDF can also become PNG or JPG images, one per page.
ImagesJPG, PNG, WEBP, HEIC/HEIF (iPhone photos), GIF, BMP, TIFF, ICO, AVIFJPG, PNG, WEBP, HEIC, GIF, BMP, TIFF, ICO, AVIF, PDF. An animated GIF can also become an MP4 or WEBM video.
AudioMP3, WAV, FLAC, AAC, M4A, OGG, WMA, OpusMP3, WAV, FLAC, AAC, M4A, OGG, WMA, Opus
VideoMP4, MKV, MOV, AVI, WMV, WEBM, FLV, M4V, MPG/MPEG, 3GP, TSMP4, MKV, MOV, AVI, WMV, WEBM, FLV, M4V, animated GIF, or just the soundtrack as MP3, WAV, AAC, M4A, FLAC or OGG
SpreadsheetsXLSX, XLSM, XLS, ODS, CSV, TSVXLSX, XLS, ODS, CSV, TSV, PDF, HTML
ArchivesZIP, 7Z, TAR, GZ, TGZ / TAR.GZZIP, 7Z, TAR, GZ

Images, audio and video can also be converted to the same format, which is handy for shrinking or resizing them (for example a large MP4 to a smaller MP4). Converter Software only offers formats that make sense for each file, so you can't pick an option that won't work.

Your files never leave your PC. Converting doesn't need the internet at all.

Back to top

Adding files

There are three ways to add files to the batch queue:

  • Drag and drop files from Windows File Explorer anywhere onto the Converter Software window.
  • Click + Add Files (or Add Files... in the middle of the empty queue).
  • Choose File › Add Files... or press Ctrl+O.

In the file window you can select several files at once (hold Ctrl and click, or press Ctrl+A). The list at the bottom of that window lets you show only one type of file, such as images.

The batch queue with nine files of different types, each showing its size, from format, to format and Waiting status
  • A file that is already in the queue isn't added twice. The status line tells you how many were skipped.
  • Files of a type Converter Software doesn't handle are left out. If none of the files you add are supported, a message tells you.
  • You can't add files while a batch is converting. Wait for it to finish, or click Stop.

Back to top

Adding whole folders

To convert everything in a folder, drag the folder onto the window, click + Add Folder, or choose File › Add Folder... (Ctrl+Shift+O).

Converter Software adds every supported file in that folder and all of its sub-folders. Other files are ignored.

With Recreate sub-folders when converting a whole folder ticked (on the Output tab, ticked by default), converted files are saved in the same folder layout as the originals, inside your output folder.

Back to top

Managing the queue

Selecting files

Click a file to select it. Hold Ctrl to select several, or Shift to select a range. Edit › Select All (Ctrl+A) selects every file.

Removing files

  • Click the × at the end of a row to remove that file.
  • Select files and press Delete, or choose Edit › Remove Selected.
  • Right-click a file and choose Remove ... from queue.

Clearing the queue

Edit › Clear Finished removes the files that have been converted. Edit › Clear All (Ctrl+Shift+Del) empties the whole queue after asking you first.

Removing files from the queue never deletes them from your PC. They are only taken off the list.

Right-click menu

Right-click any file in the queue for these options (some only appear when they apply):

OptionWhat it does
Open converted fileOpens the new file (after it has been converted).
Show in folderOpens the folder the new file was saved in.
Why Did This Fail?Shows the reason a file couldn't be converted.
Open originalOpens the original file.
Remove ... from queueRemoves the file, or all the selected files.

Double-clicking a converted file opens the folder it was saved in. Double-clicking a failed file shows why it failed.

Back to top

Choosing formats

The Convert To tab (Settings › Target Formats, Ctrl+1) sets what each kind of file becomes: one choice each for Documents, Images, Audio, Video, Spreadsheets and Archives. It also shows how many files of each kind are in the queue.

Changing a choice here updates every file of that kind in the queue.

Changing a single file

Each row in the queue has its own TO list. Use it to give one file a different format from the rest, for example to turn one PDF into a Word document while the others stay as they are.

If a file is already in the chosen format (for example an XLSX file when Spreadsheets is set to XLSX), Converter Software picks a sensible alternative for that file. You can change it in the file's TO list.

Handy conversions

  • Video to audio: pick MP3, WAV, AAC, M4A, FLAC or OGG as a video's target to save just its soundtrack.
  • PDF to images: pick PNG or JPG for a PDF to save each page as a picture.
  • iPhone photos: HEIC files convert to JPG with the default settings.
  • Animated GIF to video: pick MP4 or WEBM for a GIF.
  • Shrink or resize: pick the same format (for example MP4 to MP4) together with smaller quality settings.
  • Spreadsheet to CSV: by default each sheet becomes its own CSV file.

Back to top

Quality settings

The Quality tab (Settings › Quality, Ctrl+2) has a section for each kind of file. Scroll down the panel to see them all.

The Quality tab showing the Images and Audio sections with presets, quality slider and resize options

Images

SettingWhat it does
PresetOriginal size - high quality, Website (max 1920 px), Email / forms (max 1280 px), Thumbnail (max 400 px), or Custom when you change the settings yourself.
Quality10 to 100, for JPG, WEBP, AVIF and HEIC. Lower numbers give smaller files.
ResizeKeep the original size, scale by a percentage, or fit within a maximum width and height.
Strip metadataRemoves EXIF information such as GPS location and camera details.
Keep animation (GIF / WebP)Keeps animated images animated where the new format allows it.
Fill for transparencyThe background color used for JPG, BMP and PDF, which can't be transparent.

Audio

SettingWhat it does
PresetMusic - high quality (320 kbps), Music - standard (192 kbps), Podcast (128 kbps, mono), Voice memo (64 kbps, mono) or Custom.
Bitrate, Sample rate, ChannelsChannels is mono or stereo. Bitrate applies to MP3, AAC, M4A, OGG, WMA and Opus; WAV and FLAC are lossless.

Video

SettingWhat it does
ResolutionKeep original, 4K, 1440p, Full HD (1080p), HD (720p), SD (480p) or Small (360p). Videos are never made bigger than the original.
QualityHigh quality (bigger file), balanced, or smallest file.
Frame rate and Audio bitrateLeave on the original unless you need a smaller file.
GIF frame rate and GIF max widthUsed when a video is turned into an animated GIF.

When a video's target is an audio format, the Audio settings are used.

Documents

SettingWhat it does
EngineBest available uses Microsoft Word or LibreOffice when they are installed, for the most faithful results. Built-in converter only never uses them. The panel shows which office programs were found on your PC.
Page sizeA4 or US Letter, for text that is turned into PDF.
PDF → imageThe resolution (96 to 300 DPI) used when PDF pages are saved as images.

Spreadsheets

SettingWhat it does
SheetsAll sheets (one CSV file per sheet) or the first sheet only.
CSV encodingUTF-8 for Excel (with BOM) opens cleanly in Excel. UTF-8 and Windows-1252 are also available.
PDF pagesLandscape or portrait.

Archives

SettingWhat it does
CompressionStore (no compression), fast, normal or maximum (smallest).

Back to top

Output folder & file names

The Output tab (Settings › Output & Naming, Ctrl+3) controls where converted files go and what they are called. The line at the bottom of the window always shows where files are being saved.

The Output tab: save to a folder or next to the originals, recreate sub-folders, open the output folder when finished, naming, numbering, date stamp and what to do if a file already exists

Save converted files

SettingWhat it does
To this folderEvery converted file goes into one folder. Click Browse... (or Settings › Choose Output Folder...) to pick it. The first time, this is a Converter Software Output folder in your Documents folder.
Next to the original filesEach converted file is saved beside its original.
Recreate sub-folders when converting a whole folderKeeps the folder layout of folders you added.
Open the output folder when the batch finishesOpens the folder in File Explorer when the batch is done.

Your original files are never changed or deleted.

File names

SettingWhat it does
NamingKeep the original names, add a prefix (for example web_) or add a suffix (for example _converted).
Number files in sequenceAdds a number, with your choice of starting number and how many digits.
Add a date stampAdds today's date in the format you choose. The list shows each format using today's date, so you can see exactly what you'll get.
If a file already existsAdd (2), (3)... to the new file, overwrite the existing file, or skip the file.

The Example line shows what a converted file will be called with your current settings.

Back to top

Converting files

  1. Add your files and choose the formats and settings you want.
  2. Click Convert All (or press F5). The button shows how many files are waiting, for example Convert All (9).
  3. Watch the progress: each file has its own progress bar and status, and the bar at the bottom shows the whole batch.
A batch being converted: four files done, a video at 45 percent, the rest waiting, and Converting 5 of 9 in the status line

While a batch is running, the settings and queue are locked so nothing changes part-way through. To stop, click Stop (or press Esc). Files that were already converted are kept. Start again later and only the remaining files are converted.

Converting needs an activated copy of Converter Software. Before activation the big button reads Activate to Convert. Clicking it asks for your Installation Key, with the choices Enter Installation Key, Buy A License and Not Now.

Back to top

After converting

The queue after converting: every file shows Done, and the status line shows 9 converted
  • The status line shows how many files were converted, failed or skipped. A file that produced more than one file (such as a spreadsheet with two sheets saved as CSV) says so.
  • Click Open Output Folder (or File › Open Output Folder...) to see your files, or right-click a file and choose Open converted file or Show in folder.
  • If some files couldn't be converted, a message lists them with the reasons. Right-click a failed file and choose Why Did This Fail? to see the reason again.
  • Files are skipped when If a file already exists is set to skip and the output file is already there.
  • If you click Convert All when every file has already been converted, you are asked whether to convert them all again.

Back to top

Saved settings

If you often use the same settings (for example "Website photos" or "Office documents to PDF"), save them and load them again with one click.

  • Save: choose Settings › Save Current Settings As... (Ctrl+S) and type a name. Formats, quality and output settings are all saved.
  • Load: choose Settings › Saved Settings and click the name. The files already in the queue are updated to match.
  • Rename or delete: choose Settings › Saved Settings › Manage Saved Settings...
The Saved Settings window listing two saved settings with Rename, Delete and Close buttons

Converter Software also remembers your current settings, output folder and window size from one session to the next.

Back to top

The Settings menu & defaults

Converter Software's settings live in the panel on the right of the main window. The Settings menu jumps straight to each tab and holds the saved-settings and license items.

Menu itemWhat it does
Target Formats (Ctrl+1)Shows the Convert To tab. See Choosing formats.
Quality (Ctrl+2)Shows the Quality tab. See Quality settings.
Output & Naming (Ctrl+3)Shows the Output tab. See Output folder & file names.
Choose Output Folder...Pick the folder converted files are saved in.
Saved SettingsLoad or manage settings you saved. See Saved settings.
Save Current Settings As... (Ctrl+S)Save all current settings under a name.
Reset to DefaultsPuts the formats, quality and output settings back to the defaults below, after asking you. Your saved settings, activation and files are not changed.
Enter Installation Key... / Check License Status... / Deactivate This PC... / Buy LicenseSee Your Installation Key.
Installation Key WebsiteOpens InstallationKey.com, where you can look up or reissue your Installation Key.

Default settings

These are the settings Converter Software starts with, and goes back to when you choose Reset to Defaults:

SettingDefault
Convert ToDocuments → PDF, Images → JPG, Audio → MP3, Video → MP4, Spreadsheets → XLSX, Archives → ZIP
ImagesOriginal size - high quality (quality 92, no resizing, metadata kept, animation kept, white fill)
AudioMusic - high quality (320 kbps), original sample rate and channels
VideoOriginal resolution, balanced quality, original frame rate, 192 kbps audio. GIFs at 12 fps, max 480 px wide.
DocumentsBest available engine, A4 pages, PDF pages to images at 150 DPI
SpreadsheetsAll sheets, UTF-8 for Excel (with BOM), landscape PDF pages
ArchivesNormal compression
OutputThe Converter Software Output folder in Documents, sub-folders recreated, output folder opened when the batch finishes
File namesOriginal names, no numbering, no date stamp. If a file already exists, (2), (3)... is added to the new file.

Back to top

Keyboard shortcuts

KeysWhat it does
F1Open this user guide
Ctrl+OAdd files
Ctrl+Shift+OAdd a folder
F5Convert All
EscStop the batch
Ctrl+Shift+EOpen the output folder
Ctrl+ASelect every file in the queue
DeleteRemove the selected files from the queue
Ctrl+Shift+DelClear the whole queue
Ctrl+1 / 2 / 3Convert To, Quality and Output tabs
Ctrl+SSave current settings as...
Alt+F4Exit (you are asked first if a batch is running)

Back to top

Your Installation Key

Your Installation Key is in your purchase email and on your download page. It starts with CONSO-. It activates Converter Software on your PC. One key works on the number of PCs your license allows.

The Enter Installation Key window

The license row

The top right of the main window always shows your license status on one line:

You seeMeaning
License Invalid | Buy A License | Enter Installation KeyConverter Software isn't activated on this PC yet, or the license needs attention. Converting is paused.
LicensedEverything is unlocked. The purchase options are hidden.

Activating

  1. Click Enter Installation Key in the license row, or choose Settings › Enter Installation Key...
  2. Paste your key into the box. Dashes are added for you, so it doesn't matter if you copy it with or without them.
  3. Click Activate. You need to be online for this. Everything unlocks straight away, with no restart.

For your security, once a key has been entered it's only ever shown with the middle hidden, for example ABCD-XXXX-XXXX-WXYZ.

The Settings menu

Menu itemWhat it does
Enter Installation Key...Activate Converter Software on this PC.
Check License Status...Shows your key (partly hidden), who it's licensed to, the license type, the expiry date if there is one, and how many of your PCs are using it.
Deactivate This PC...Frees this PC's activation so you can use the key on another PC. Your license stays valid.
Buy LicenseOpens the Converter Software website to buy a license. Hidden once you're licensed.

Moving to a new PC

On the old PC choose Settings › Deactivate This PC..., then install Converter Software on the new PC and activate it with the same key. If the old PC has died or been wiped, contact support and we'll free the activation for you.

Working offline

Converter Software checks your license quietly each time it starts and once a day while it's open. If your PC is offline, or the license service can't be reached, it keeps working normally for 7 days and checks again when you're back online.

"Your license needs attention"
The full message is "Your license needs attention. Invalid activation token for this hardware, converting files is paused until it's resolved." It means this PC's activation is no longer valid, for example because it was deactivated, the license was refunded or expired, or Windows was reinstalled. Click Enter Installation Key and activate again. If that doesn't work, contact support.
"Maximum number of activations reached"
Your key is already active on all the PCs your license allows. Deactivate it on a PC you no longer use (Settings › Deactivate This PC...). If that PC isn't available any more, contact support and we'll reset it.
"License key not found" or "This key is for a different product"
Check the key was copied exactly from your purchase email, with no extra spaces. Each Easier Software title has its own key, so a key for another program won't activate Converter Software. A rejected key never uses up an activation.
"Could not reach the license server"
Activation needs an internet connection. Check you're online and that a firewall, antivirus or VPN isn't blocking Converter Software, then try again.

Back to top

Troubleshooting

A file failed to convert
Right-click it and choose Why Did This Fail? for the reason. Common causes are a damaged or password-protected file, or a file that is still being written or is open in another program. For documents, try switching Quality › Documents › Engine to the other choice. If you can't solve it, contact support and include the reason shown.
I can't choose DOC as a target, or converting to DOC fails
Saving in the old Word .doc format needs Microsoft Word or LibreOffice installed on your PC. Choose DOCX instead, which every modern word processor opens.
My files aren't being added
Only supported file types are added (see What it can convert); others are ignored, and if none are supported a message tells you. Files already in the queue aren't added twice. Files can't be added while a batch is running: wait for it to finish or click Stop.
Adding a folder adds nothing, or fewer files than expected
Only supported files inside the folder and its sub-folders are added. Check the folder contains files of the types listed in What it can convert, and that they aren't already in the queue.
Where are my converted files?
The line at the bottom of the window shows where files are being saved. Click Open Output Folder, or right-click a converted file and choose Show in folder. By default they go to Documents\Converter Software Output.
My converted files have (2) or (3) in their names
A file with the same name was already in the output folder, so Converter Software kept both. Change If a file already exists on the Output tab to overwrite or skip instead.
The converted files are bigger (or smaller) than I wanted
Adjust the Quality settings: for images lower the quality or resize; for video choose a smaller resolution or smallest file; for audio choose a lower bitrate. Lossless formats such as PNG, WAV and FLAC are naturally larger.
A spreadsheet turned into several CSV files
CSV files can only hold one sheet, so each sheet becomes its own file. To get just the first sheet, change Quality › Spreadsheets › Sheets to the first sheet only.
The button says "Activate to Convert"
Converter Software isn't activated on this PC yet, or the license needs attention. You can still add files and change every setting. Click the button, or Enter Installation Key in the license row, and activate with the key from your purchase email. See Your Installation Key.
Converter Software won't start
Restart your PC and try again. If it still won't start, reinstall it over the top (your settings and activation are kept). If that doesn't help, send us the log files from %APPDATA%\Easier Software LLC\Converter Software (paste that into the Windows Explorer address bar to open it).
Windows SmartScreen or my antivirus warns about the installer
Click More info then Run anyway. Some antivirus programs are cautious with new software; if yours blocks Converter Software, add it to the allowed list.
Where are my settings stored?
In %APPDATA%\Easier Software LLC\Converter Software on your PC. Uninstalling leaves this folder in place, so a reinstall keeps your settings and activation.

Still stuck?

We're happy to help. Tell us what you were doing and what the message said.

Contact support

Back to top

Updating & uninstalling

Checking for updates

Updates are free. Choose About › Check for Updates.... Converter Software checks the website (it takes a few seconds) and tells you if you're up to date or if a newer version is available, with a button to download it. Run the new installer over the top of your current version; your settings and activation are kept.

The Check for Updates window

If it says "Couldn't check for updates", you're probably offline. Try again later, or visit convertersoftware.com.

The Help and About menus

Menu itemWhat it does
Help › User GuideOpens this guide.
Help › Contact SupportOpens the Easier Software support page.
Help › Converter Software WebsiteOpens convertersoftware.com.
Help › More ApplicationsOur other Windows software.
About › About Converter Software...Version number, license status and links.
About › Check for Updates...See above.

Uninstalling

If you're moving to a new PC, deactivate first (Settings › Deactivate This PC...). Then open Windows Settings › Apps, find Converter Software and click Uninstall. Your settings stay in %APPDATA%\Easier Software LLC\Converter Software in case you reinstall; delete that folder to remove them too. Your own files are never touched.

Back to top