Getting started
Bulk Captures takes screenshots of your screen, a window, a region or a long scrolling page with one hotkey - and it can visit a whole list of websites and save a screenshot of every page for you.
What you need
- A Windows 10 (version 1809 or later) or Windows 11 PC, 64-bit.
- Your Installation Key from your purchase email (it looks like
XXXX-XXXX-XXXX-XXXX). - Nothing else for screen captures; a list of web addresses if you want bulk website captures.
- No web browser is needed for website screenshots - Bulk Captures has its own built-in browser engine.
Install and activate
- Run BulkCaptures-Setup.exe from your download page. If Windows shows "Windows protected your PC", click More info then Run anyway. This appears for software from smaller publishers.
- Click Next, accept the license agreement, choose where to install, then click Install and Finish.
- Bulk Captures opens with a short loading screen, then the main window. You can look around straight away.
- Click Enter Installation Key at the top right of the window (or Settings › Enter Installation Key...), paste your key and click Activate. See Your Installation Key.
Until Bulk Captures is activated you can open every window, build URL lists and change every setting. Capturing and saving screenshots need an activated Installation Key.
A quick tour of the window
- 1Menu bar - File, Capture, Batch, Settings, Help and About.
- 2License row - Licensed or License Invalid, then Buy A License (only until you're activated) and Enter Installation Key.
- 3Capture tab - pick a capture mode and its options.
- 4Website URLs tab - your list of websites, screen sizes, page options and the capture queue.
- 5Timed & Interval and Output & Naming tabs - repeat captures, and where and how files are saved.
- 6Activity and recent captures - a running log, and thumbnails of your latest captures. Double-click a thumbnail to open it.
- 7Bottom bar - status, the folder you're saving to, progress, Open Folder, Stop and the main button: Capture Now, Start Batch or Start Interval depending on the tab. It reads Activate to Capture until you activate.
Until your first capture, the Bulk Captures logo fills the right-hand side of the window.
Capture modes
On the Capture tab, click a mode tile, then click Capture Now. Or skip the window altogether and press the mode's hotkey from any program. The Capture menu starts each mode straight away too.
| Mode | What it captures | Hotkey to begin with |
|---|---|---|
| Full Screen | The whole monitor your mouse is on. | PrtSc |
| Monitor | The monitor chosen under Monitor on the Capture tab. | Ctrl+PrtSc |
| All Monitors | Every monitor together as one image, laid out the way Windows arranges them. | - |
| Each Monitor | Every monitor saved as its own file. | - |
| Active Window | The window you're working in, with exact edges. | Alt+PrtSc |
| Region | An area you drag out with the mouse. | Ctrl+Shift+PrtSc |
| Saved Region | The same area every time, without drawing it again. | Ctrl+Shift+R |
| Freehand | Any shape you draw around something. Outside the shape is transparent in PNG, WebP and TIFF files (white in JPG, BMP and PDF). | Ctrl+Shift+F |
| Scrolling Window | A long page or document in a window, scrolled and joined into one tall image. | Ctrl+Shift+S |
Options on the Capture tab
- Monitor - which monitor Monitor mode captures.
- Countdown - wait 0 to 60 seconds before capturing, so you can open a menu or get things ready.
- Copy each capture to the clipboard - paste it straight into an email or document.
- Hide this window while capturing - keeps Bulk Captures out of your screenshots.
Every capture is saved automatically into your output folder with an automatic file name, and appears under Recent Captures. Capture › Copy Last Capture to Clipboard copies the most recent one at any time.
Until Bulk Captures is activated you can open every window, build URL lists and change every setting, but capturing and saving are paused and the main button reads Activate to Capture.
Hotkeys and the tray
Hotkeys work in any program while Bulk Captures is running, including when it's minimized to the system tray. To change them, choose Settings › Hotkeys..., click a box, press the new shortcut, then click Save Settings.
As well as the capture modes, Ctrl+Shift+I starts and stops an interval capture.
If another program already uses a shortcut, Windows won't let Bulk Captures have it. The activity log tells you which hotkey is affected; pick a different one. While Bulk Captures is running, PrtSc on its own is used by Bulk Captures instead of the Windows screenshot tool.
The system tray
Right-click the Bulk Captures icon next to the clock for quick captures, starting or stopping an interval capture, opening the output folder, opening the settings, or exiting. Double-click the icon to open the window. In Default Settings › General you can choose to minimize to the tray, keep running in the tray when you close the window, and start with Windows.
Regions and saved regions
For Region, Freehand and Set Saved Region..., the screen dims and freezes. Drag with the mouse to select the area (or draw around it for Freehand). The size of your selection is shown in pixels. Let go of the mouse button to capture. Press Esc or right-click to cancel.
Saved Region captures the same area every time. Set it with Set Saved Region... on the Capture tab or Capture › Set Saved Region.... The Capture tab shows which monitor it's on, its position and its size. It's ideal for dashboards, charts and repeated interval captures.
Scrolling windows
- Click the window you want to capture so it's the active window, and scroll it to the top.
- Press Ctrl+Shift+S (or choose Capture › Scrolling Window).
- Bulk Captures scrolls the window, captures each screen and joins them into one tall image. It stops at the bottom of the page or after the maximum number of screens.
In Default Settings › Capture you can set the maximum number of screens (2 to 200) and how long to wait after each scroll, which helps with slow pages. Parts of the window that never move, such as a fixed header, are kept once rather than repeated.
Scrolling capture works with windows that scroll with the mouse wheel. If a program doesn't, Bulk Captures saves a single screen. For websites, the Website URLs tab gives better full-page results.
Timed and interval captures
Interval capture
- Open the Timed & Interval tab. Under What to capture, choose the full screen, a chosen monitor, all monitors, the active window or your saved region.
- Set Every 1 to 3600 seconds or minutes.
- Choose when to Stop: when you press Stop, after a number of captures, or after a number of minutes.
- Click Start Interval (or Batch › Start Interval Capture, or Ctrl+Shift+I). The Interval status panel shows the time to the next capture, how many have been taken and how long it's been running.
Tick Skip captures when nothing on screen has changed to avoid saving lots of identical images. You can minimize Bulk Captures to the tray and it keeps capturing in the background.
Countdown capture
For one delayed capture, set Countdown on the Capture tab, or use the 3 s, 5 s and 10 s buttons on the Timed & Interval tab.
Adding website addresses
Open the Website URLs tab. There are three ways to fill the URL list:
- Type or paste addresses into the list, one per line, or click Paste to add what's on your clipboard. You don't need to type
https://-example.comis fine. - Load a file - click Load File (or File › Open URL List...) and choose a
.txt,.csv,.tsvor sitemap.xmlfile. In spreadsheets, the first cell on each row that looks like a web address is used, so an exported list of clients works as it is. - Import a sitemap - click Sitemap (or File › Import Sitemap...) and enter a website (for example
example.com) or a sitemap address. Every page in the sitemap is added, including pages in linked sitemaps.
Duplicate addresses are only captured once, and lines starting with # are ignored, so you can keep notes in your list files. Below the list you can see how many URLs, screen sizes and captures the batch will make.
Managing the list
- Remove one address - select its line in the list and delete it, just like in a text editor.
- Clear the whole list - click Clear or choose Batch › Clear URL List. Bulk Captures asks first.
- Save the list - File › Save URL List... saves it as a text file, one address per line. Bulk Captures also remembers your list when you close it.
Screen sizes and page options
Viewports and devices
Tick every screen size you'd like each page captured at. Each address is captured once per ticked size.
| Viewport | Width × height |
|---|---|
| Desktop | 1920 × 1080 |
| Laptop | 1366 × 768 |
| Tablet | 768 × 1024 |
| Phone | 390 × 844 |
| Custom | Any size from 240 to 7680 wide and 240 to 4320 high. |
Page capture
| Option | What it does |
|---|---|
| Full page / Visible area | Full page captures the whole length of each page. Visible area captures just what fits on the screen size. |
| Wait after load | Extra time (0 to 60 seconds) after a page finishes loading, for animations and late content. |
| Timeout | How long to wait for a page (5 to 300 seconds). Slow pages that have mostly loaded are captured anyway. |
| Retries | How many times to try again if a page fails to load (0 to 5). |
| Scroll first so lazy images load | Scrolls down each page before capturing, so images that only load when you scroll appear in the screenshot. |
| Hide cookie banners | Hides common cookie-consent banners so they don't cover the page. |
| Mobile browser for tablet / phone | Tablet and phone captures visit the page as a mobile browser, so you see the mobile version of the site. |
Running a website batch
Click Start Batch on the Website URLs tab (the number shows how many captures it will make), or choose Batch › Start Website Batch.
| Queue status | Meaning |
|---|---|
| queued | Waiting its turn. |
| loading / loading images | The page is loading, or being scrolled so lazy images appear. |
| capturing | The screenshot is being taken. |
| saved | Finished. The image size is shown in the Size column. |
| retry 1, retry 2 | The page didn't load and is being tried again. |
| failed - reason | The page couldn't be captured, for example because the address doesn't exist or the site didn't answer in time. |
| stopped | The batch was stopped before this page. |
- Pause / Resume - the main button (or Batch › Pause / Resume Batch) pauses after the current page.
- Stop (or Batch › Stop Batch) - stops the batch. Everything already saved is kept.
- Batch › Retry Failed URLs - runs just the failed and stopped pages again.
- Double-click a row in the queue to open that page in your web browser.
Website batches visit pages as a new visitor, without your browser's logins. For pages behind a login, open them in your browser and use Scrolling Window, Active Window or Region instead.
Where captures are saved
Open the Output & Naming tab. Captures go into the folder under Save to, which is Pictures\Bulk Captures to begin with. Click Browse... (or File › Change Output Folder...) to choose another folder, and Open (or File › Open Output Folder...) to see it in File Explorer.
- Sub-folder - an optional sub-folder pattern. The starting
{date}puts each day's captures in their own folder. Use{domain}to give each website its own folder. - If the file exists - Add a number (never overwrites anything), Overwrite or Skip.
Automatic file naming
There are two naming patterns: one for screen captures and one for website captures. Click a code button to insert it. The two example lines below the patterns show exactly what your next file names will look like.
| Code | Becomes | Code | Becomes |
|---|---|---|---|
{date} | 2026-10-03 | {time} | 09-14-02 |
{n} | Running counter, e.g. 001 | {domain} | Website, e.g. example.com |
{path} | Page path, e.g. about_team | {title} | Window or page title |
{mode} | Capture mode, e.g. region | {viewport} | desktop, laptop, tablet, phone |
{width} {height} | Image size in pixels | {monitor} | Monitor number |
{year} {month} {day} | Parts of the date | {hour} {minute} {second} | Parts of the time |
The counter starts at the number in Counter starts at, with as many Digits as you choose (001, 0001 and so on). Settings › Reset File Counter starts it again. Characters Windows doesn't allow in file names are replaced automatically.
The starting website pattern {domain}_{date}_{n} gives names like acme-plumbing.com_2026-10-03_001.png, which sort neatly by site.
Formats and image options
| Format | Good for |
|---|---|
| PNG | The starting choice. Sharp text, no quality loss, supports transparency. |
| JPG | Small files for photos and long pages. Set the Quality (10 to 100%). |
| WebP | Small, sharp files for websites. Uses the Quality setting. Very tall pages are scaled to WebP's limit of 16,383 pixels. |
| BMP / TIFF | For programs that need these formats. |
| One PDF per capture, or tick Combine each batch into one multi-page PDF to get one PDF for a whole website batch or interval run. |
These options apply to every capture - single captures, website batches and interval captures:
| Option | What it does |
|---|---|
| Resize to width | Scales every capture to the width you set, keeping its proportions. |
| Thumbnails | Also saves a small copy of each capture, at the width you set, in a thumbs folder next to the full-size image. |
| Watermark | Stamps text or your logo image on every capture. Choose the position, opacity and size. |
| Border | Adds a colored border of 1 to 50 pixels. |
| Drop shadow | Adds a soft shadow around the capture (with a transparent edge in PNG and WebP). |
Default Settings
Open Settings › Default Settings... (Settings › Hotkeys... opens the same window at the Hotkeys tab). Changes take effect when you click Save Settings. Options on the main window's tabs are saved automatically as you change them.
General
| Setting | What it does |
|---|---|
| Start Bulk Captures when Windows starts (in the tray) | Bulk Captures starts quietly in the tray with its hotkeys ready. |
| Minimize to the system tray | Minimizing hides the window; the tray icon and hotkeys stay ready. |
| Closing the window keeps Bulk Captures running in the tray | Use File › Exit or the tray menu to close it completely. |
| When a capture or batch finishes | Show a Windows notification (when the window is hidden), play a sound, and open the output folder after a batch. |
Capture
| Setting | What it does |
|---|---|
| Countdown before capture | The starting countdown for single captures. |
| Monitor | The monitor used by Monitor mode. |
| Scrolling capture | The maximum number of screens (2 to 200) and the wait after each scroll. |
| Copy to clipboard / Hide this window while capturing | The same options as on the Capture tab. |
Hotkeys
A shortcut box for each capture mode and for starting and stopping an interval capture. See Hotkeys and the tray.
Reset All Settings
Click Reset All Settings... and confirm. This puts the capture options, hotkeys, website options, file naming, output folder and format back to how they were when you installed. Your saved screenshots, your URL list and your license are not affected. To restart just the file number, choose Settings › Reset File Counter.
Your Installation Key
Your Installation Key is in your purchase email and on your download page. It looks like XXXX-XXXX-XXXX-XXXX. It activates Bulk Captures on your PC. One key works on the number of PCs your license allows.
The license row
The top right of the main window always shows your license status on one line:
| You see | Meaning |
|---|---|
| License Invalid | Buy A License | Enter Installation Key | Bulk Captures isn't activated on this PC yet, or the license needs attention. Capturing and saving screenshots are paused. |
| Licensed | Everything is unlocked. The purchase options are hidden. |
Activating
- Click Enter Installation Key in the license row, or choose Settings › Enter Installation Key...
- Paste your key into the box. Dashes are added for you, so it doesn't matter if you copy it with or without them.
- Click Activate. You need to be online for this. Everything unlocks straight away, with no restart.
For your security, once a key has been entered it's only ever shown with the middle hidden, for example ABCD-XXXX-XXXX-WXYZ.
The Settings menu
| Menu item | What it does |
|---|---|
| Enter Installation Key... | Activate Bulk Captures on this PC. |
| Check License Status... | Shows your key (partly hidden), who it's licensed to, the license type, the expiry date if there is one, and how many of your PCs are using it. |
| Deactivate This PC... | Frees this PC's activation so you can use the key on another PC. Your license stays valid. |
| Buy License | Opens the Bulk Captures website to buy a license. Hidden once you're licensed. |
Moving to a new PC
On the old PC choose Settings › Deactivate This PC..., then install Bulk Captures on the new PC and activate it with the same key. If the old PC has died or been wiped, contact support and we'll free the activation for you.
Working offline
Bulk Captures checks your license quietly each time it starts and once a day while it's open. If your PC is offline, or the license service can't be reached, it keeps working normally for 7 days and checks again when you're back online.
"Your license needs attention"
"Maximum number of activations reached"
"License key not found" or "This key is for a different product"
"Could not reach the license server"
Troubleshooting
The main button says "Activate to Capture"
A hotkey doesn't do anything
Bulk Captures appears in my screenshots
A scrolling capture only saved one screen
The saved region captures the wrong area
Some websites weren't added to the list
example.com or https://example.com/page. Lines starting with # and duplicates are skipped. In CSV files, the first cell on each row that looks like an address is used.A page shows "failed - page failed to load" or "timed out"
Images are missing from a full-page screenshot
A cookie banner or pop-up covers the page
The sitemap couldn't be read
/sitemap.xml or /sitemap_index.xml; enter the full sitemap address if the website's address alone doesn't work.Bulk Captures won't start
%APPDATA%\Easier Software LLC\Bulk Captures (paste that into the Windows Explorer address bar to open it).Windows SmartScreen or my antivirus warns about the installer
Where are my settings stored?
%APPDATA%\Easier Software LLC\Bulk Captures on your PC. Uninstalling leaves this folder in place, so a reinstall keeps your settings and activation.Still stuck?
We're happy to help. Tell us what you were doing and what the message said.
Updating & uninstalling
Checking for updates
Updates are free. Choose About › Check for Updates.... Bulk Captures checks the website (it takes a few seconds) and tells you if you're up to date or if a newer version is available, with a button to download it. Run the new installer over the top of your current version; your settings and activation are kept.
If it says "Couldn't check for updates", you're probably offline. Try again later, or visit bulkcaptures.com.
The Help and About menus
| Menu item | What it does |
|---|---|
| Help › User Guide | Opens this guide. |
| Help › Contact Support | Opens the Easier Software support page. |
| Help › Bulk Captures Website | Opens bulkcaptures.com. |
| Help › More Applications | Our other Windows software. |
| About › About Bulk Captures... | Version number, license status and links. |
| About › Check for Updates... | See above. |
Uninstalling
If you're moving to a new PC, deactivate first (Settings › Deactivate This PC...). Then open Windows Settings › Apps, find Bulk Captures and click Uninstall. Your settings stay in %APPDATA%\Easier Software LLC\Bulk Captures in case you reinstall; delete that folder to remove them too. Your own files are never touched.
